Insesame

Limescale is dirt caused by the deposition of minerals in water, and can be divided into three types. The most common type of dirt is magnesium-based limescale, or metal soap.

This dirt is made up of a combination of fatty acids, which are used in soaps such as shampoo and body wash, as well as detergents, and magnesium in tap water. It is insoluble, meaning that water and detergents do not easily penetrate it.

Bath Master was developed after thoroughly examining 7,300 bathrooms during restoration work.
It can remove even small amounts of calcium and easily cleans away dirt from accent panels.

Its unique feature is that it can be applied from the waist down, so it can also be used in places where soaps are used, such as on sinks.

Limescale, which is the deposition of minerals in water, can be divided into three types.
One of these is calcium-based limescale, called calcium carbonate. This cement-like stain is prone to depositing when the water is hot and alkaline.

Calcium Stain Remover uses two different types of surfactants that penetrate into both lower and deeper layers, as well as the quadruple effect of two acids, to attack and remove calcium stains.

Chlorine is effective against mold, but sodium hypochlorite constantly breaks down into salt water and oxygen. It is usually formulated at around 3%, but over time this drops to around 0.5%. In other words, it is a weak mold remover that smells of chlorine, so it is not very effective when used on silicone caulking, etc.

Mold Removal Master contains 6% sodium hypochlorite to begin with. Furthermore, a formula that delays the decomposition of chlorine prevents it from breaking down. Another unique feature is that because the chlorine does not break down, there is no chlorine smell.

Insesame's unique high-penetration technology allows these ingredients to reach the mold mycelium, resulting in a higher level of bleaching.

Please try our mold removal service, which cannot be achieved with gels.

A detergent for tough stains that is easy to rinse and can be diluted.
It can be diluted for powerful cleaning at a cost-effective price.

Cesacool is a more powerful version of that detergent, without the harsh taste or damage to painted surfaces.

This detergent was recommended by the Cleaning Improvement Committee and developed with your cooperation.
Please give it a try.

What makes Toilet Shokunin unique is that it is an extremely strong acid that does not damage metal.

It contains acids that are as strong as inorganic acids such as hydrochloric acid, but are not normally used for cleaning.

It can be used to remove stubborn urinary stones as well as troublesome areas where staining would be a problem, so some people use it in sinks and bathrooms.

For stubborn stains around water areas and trays, please consider Toilet Shokunin.

Limescale is formed when minerals in water precipitate, but it's no exaggeration to say that the final boss of all limescale is silica-based limescale called silicon dioxide. This is silica scale.

This stain doesn't just adhere to the surface, but rather bonds with the silica components in glass and glaze, so it can't be removed with alkaline or acidic solutions.
You need to break that bond.

Limescale Shokunin is Japan's first acidic powder cleanser.
The acid dissolved in water removes excess scale from around the silica, and several types of abrasives intricately intertwine to release the bonds.

You can adjust the strength of the cleanser by changing the amount and water, so it can be thoroughly removed by hand or with a polisher.