EC Titanium™ IE5+ integrated motor drive systems ABB

This is intended for customers using three-phase induction motors.

<Size, specifications, environment>
The motors are used with outputs from 5.5kw to 315kw.

The motor can be operated exclusively with an inverter.

The motors are designed for non-explosion-proof environments.

<Industry>
Not for any specific industry, but for all industries.

<Application>
More effective for motors that run continuously and for long periods of time.
Motors that run continuously for approximately four hours a day, such as utility fans and pumps, should be targeted first.
Pumps
- Fans
- Agitators
- Mixers
- Conveyors
- Compressors

<Long service life>
Long service life can be expected because the rotor is designed to generate less heat.
Similarly, the maintenance interval can be extended because the bearing lubrication pace is longer than that of general induction motors.


<Differences from conventional synchronous high-efficiency motors>
- Easier maintenance as no permanent magnets are used
- Higher safety of supply as no rare earths are used
- CO2 reduction is expected from the production process as recycled materials are used.

The EC Titanium is an integrated inverter motor, which is also easy to install.

It is therefore ideal for missed inverterisation, i.e. compact applications, with direct start-up.

For example, equipment in environments where it is not possible to install an inverter panel, such as narrow and secluded areas, or applications where the hurdles to installing an inverter panel are too high.

If you find such an application in your factory, it is a great opportunity to save energy.

<Applications>
This is more effective for motors that run continuously and for long periods of time.
Target first of all motors that run continuously for about four hours a day, such as utility fans and pumps.
-Pumps
-Fans
-Agitators
-Mixers
-Conveyors
-Compressors

These are the next generation of motors with high efficiency and long life.

ABB's IE5+ inverter-integrated motor EC Titanium™ is an ultra-efficient motor with a maximum efficiency of IE5 or higher according to IEC efficiency standards.

The ultra-high efficiency is achieved by a rotor structure that combines synchronous reluctance and permanent magnet technology.

This motor series in particular achieves high efficiency and high torque, which is considered difficult to achieve with small motors.

Although permanent magnets are used, they are rare earth-free, so they are environmentally friendly and there is no risk of supply insecurity.

The output range is 0.75kW~11kW and the integrated inverter eliminates the need for an inverter panel and reduces wiring man-hours.

Inverters can easily be converted to inverters in environments where it is difficult to install inverters, which would have been given up in the past.