B-H Analyzer IWATSU ELECTRIC

Ferrite, Permalloy, Amorphous. Si steel sheet, Powder Core, Troidal, EE Core Single Sheet, Powder, BH, B-H

De facto standard from research and development of soft magnetic materials to production inspection -

High-accuracy and high-precision core loss measurements
IWATSU's B-H analyzer uses the CROSS-POWER method (adopted in IEC62044-3) to achieve high-accuracy and high-precision measurements by integrating processing with low phase errors over the frequency spectrum and by compensating for the amplitude and phase characteristics of current sensing resistors and detection circuits.
After several model changes since its launch in 1984, IWATSU's B-H analyzer has steadily improved accuracy and precision, contributing to the further development of power electronics.

Features
10Hz to 10MHz wideband measurement frequencies(SY-8218)
High power amplifier applied to maximum voltage ±150V, maximum current ±6A, up to 5MHz(SY-5001)
Automatic measurement of temperature characteristics (-55ºC to +180ºC) of up to 4 samples compliant with automotive parts standard AEC-Q200 Grade 0 (SY-330)
Automatic measurement of temperature characteristics (-30ºC to +150ºC) for up to 41 samples(SY-321A)
Achieves the measurement of small piece single board samples with a length of 36mm or more (width of 35mm or less) (SY-956)
Measurements with DC bias superimposed up to 30A are possible(SY-960/961/962)